Installing a sink cabinet is an essential job and sink mount bracket installation is no exception. As the base of your sink, it is crucial that the sink mount bracket be strong enough to withstand the weight of the sink and the amount of pressure applied to it. That being said, there are many different types of mount brackets available in the market today and most of them use various kinds of screws and bolts to fasten the cabinet together. This makes it more complicated than it seems, but with some basic hand tools, you can do the job on your own. Read more about Sink Mount Bracket Installation.
If you already have a sink installed in your bathroom then it is advisable to replace the cabinet with one that will complement the sink. It is recommended that you choose a sink that has a similar size, shape, style and finish as the existing cabinet. Although it may take a bit more work, this is the more practical approach to take when it comes to mounting a new sink cabinet in your bathroom. If you don't have a sink that matches the design and style of your existing cabinet then you need to make sure that the new sink cabinet will also fit into the existing holes. This is where you will need the right tools such as a tape measure and level. The measurement is very important as it will determine how big your sink is.
Once you have decided what type of sink mount bracket will be used for your sink cabinet, you need to figure out the mounting position. For example, if you are mounting it on the wall then you can mount it on the studs and use lag screws. However, if you are going to do the mounting in the floor-standing manner, then you need to prepare the ground first by covering it with a slab. If the mounting is done on the floor-standing manner, then the floor needs to be shored up to provide enough support for the sink cabinet. You can use additional lag screws to secure the cabinet to the floor.
Now it's time to set the sink on the brackets. Make sure that the sink is level before you screw the sink mount bracket into place. In addition, make sure that the sink's tongue is at a right angle to match the screw line. This will prevent water from flowing out during showering or bathing.
After you are done with installing the plumbing, you need to take care of any electrical wiring near the mounting location. You need to plug the wires before mounting them into their respective mounts. You may also consider the installation of an optional lighting system for a more personalized look.
Your countertop is the last part of the vanity to be installed. You can use stainless steel screws to fasten the sink mount bracket on top of the sink. However, to prevent shifting while you wash hands, you may consider adding a sink drawer below the sink. By using proper installation procedures, you will get a beautiful sink that will match the rest of your bathroom. Read more here.
See more here: https://youtu.be/OZS1OeSmGQo.
